An inline internal tube connector for joining two tubes of the same diameter. This fitting can only be used with 3.2mm wall thick tube.
This fitting is not recommended for high or tensile load applications.
Complies with B.S. EN1461.
Intended for: Steel handrail tube, also known as a Key Clamp or Pipe Clamp
Not suitable for use with our alloy scaffolding tube or steel scaffolding tube. To join alloy tube you must use a
pressed sleeve, and for steel scaffolding tube you can use a
pressed joint pin.
Can be used for Handrails, Walkways, Edge Protection, Racking, Guardrails, Balustrades.
Material - Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999)
Equivalent Product to:
Interclamp |
150 |
Keeklamp |
18 |
Fastclamp |
C01 |
Alvin |
A9 |
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg
also known as a Key Clamp or Pipe Clamp