A tee connection supplied machined out to the specific angle of 30° or 45°. The fittings are stocked pre-drilled in these two angles only. Typical
use on sloping guardrail for the top rails with the upright vertical. Normally used in conjunction with the clamp fitting 126.
Intended for: Alloy tube and Steel tube. Handrails, Walkways, Edge Protection, Racking, Guardrails, Balustrades.
Complies with B.S. EN1461.
Material - Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999)
Equivalent Product to:
Interclamp |
125 |
Keeklamp |
15 |
Fastclamp |
C02 |
Alvin |
A6 |
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg
Also available in 33.7 mm Pipe Clamps and 48.3mm size Key Clamps