A single tube tie bracket used for the construction of hand rails and/ or similar tube assemblies. Comprises of an extra thick, extra-long, back plate drilled with twin 14.5 mm holes and a single tube 300mm long welded to its face. Designed with hole centre’s of 150mm to spread the load over three courses of brickwork or to align with mortar joints. Comes complete with hi vis yellow end cap.
Normally used for concrete and masonry connections in conjunction with 12mm Excalibur bolts. Can also be fixed with conventional nylon plug & coach screw.
| Info |
Detail |
| Tube Length |
300mm |
| Tube Diameter |
48.3mm |
| Back Plate Length |
185mm |
| Back Plate Width |
60mm |
| Back Plate Thickness |
8mm |
| Hole Details |
2x14mm holes |
Please take note of installation details:
- Performance of the bracket is 100% dependent on the load applied to the top fixing.
- If the load is insufficient, it cannot be transferred through the bracket to the scaffold.
- The installer is legally obliged to perform preliminary tests to calculate allowable loads. Full test data is available on request.
- They also require a design or compliance sheet.
