Structural flush side palm base fixing guardrailing to wall, steps or ramps etc. The flush design enables posts to be tight to the structure. The tube is unable to pass through the fitting. Should this be required then the base must be reamed out. If the base is reamed out the bottom fixing will become redundant.
Use our 10mm x 80mm Nylon frame fixings to secure this fitting.
Info
|
Detail
|
Manufacturing Standard
|
BS EN1461
|
Material
|
Blackheart malleable iron casting (BS EN 1562:1997) using grade
B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999)
|
Allen Key Size
|
3/8
|
Weight
|
1.1kg
|
Intended for steel or aluminium tube used in walkways, edge
protection, racking, guardrails, balustrades.
All clamps come with stainless steel grub screws fitted. If
full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub
screw is capable of withstanding an applied slipload of 900kg.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Brand
|
Equivalent Item
|
Interclamp
|
146
|
Keeclamp
|
68
|
Fastclamp
|
C15
|
Alvin Clamp
|
A14
|